Home > Disposable IBP Transducer >

HP Disposable IBP Transducer Single Channel Kit Blood Pressure IBP Transducer

Product Categories

Reusable Spo2 Sensor [949]
Disposable Spo2 Sensor [339]
Spo2 Extension Cable [303]
ECG Cable [396]
EKG Cable [216]
ECG Electrode [117]
Fetal Transducer [510]
CTG Belt [126]
Ultrasound Transducer Probe [639]
EEG Cable [162]
EEG Cap [93]
Disposable IBP Transducer [87]
IBP Cable [108]
Digital Blood Pressure Cuff [378]
Ultrasound Needle Guide [441]
Hand Held Pulse Oximeter [118]
Skin Temperature Probe [63]
Wireless Ultrasound Probe [180]
Finger Pulse Oximeter [24]
Disposable Face Mask [51]
Disposable Protective Gown [42]
Non Contact Infrared Thermometer [39]
Portable Oxygen Concentrator [123]

Shenzhen Teveik Technology Co., Ltd.

Contact Now

HP Disposable IBP Transducer Single Channel Kit Blood Pressure IBP Transducer

Ask Lasest Price
Brand Name :	teveik
Model Number :	B105A
Certification :	ISO13485
Price :	Negotiation
Payment Terms :	L/C,T/T, Western Union or paypal
Supply Ability :	5,000 sets per month
Delivery Time :	5-10 working days after received your payment

Add to Cart

Product Details
Company Profile

HP Disposable IBP Transducer Single Channel Kit Blood Pressure IBP Transducer

HP Disposable IBP Transducer Single Channel Kit Blood Pressure Sensor

Specifications:

Product Name	Disposable IBP Transducer for Utah / Utah Blood Pressure Transducer
Barometric pressure	70~106Kpa
Relative humidity	10~90% (non-condensing)
Operating pressure range	-50 ~ + 300 mmHg
Sensitivity	5.0μV/V/mmHg ±3%
Nonlinearity and hysteresis	full-scale reading±1.5%
Input impedance	1200Ω ~3200Ω
Output impedance	300±5%
Zero pressure offset	-20mmHg~+20mmHg
Thermal offset shift	≤±0.3mmHg/°C
Offset drift	After warm-up for 20 seconds, drift within 2 mmHg within 8 hours
Thermal span shift	≤±0.1%/°C
Frequency response	Standard pressure set (48 "/ 12") is 40 Hz; Separate sensor > 200 Hz
Defibrillator withstand	Defibrillation depends on the final connection of the equipment
Leakage current	Leakage current is dependent on the final connection of the equipment
Overpressure load	-400~+4000mmHg
Shock resistance	Shock resistance With stand falling from one meter for three times
Light sensitivity	When exposed to a 3400°K tungsten light, candle light at 3000 feet, it's less than 1 mmHg under rated voltage
Contact with the human body	≤168h
Storage and transport environment requirements	- 20 ° C~ + 60 ° C, <90%(non-condensing), no corrosive gas and indoor ventilation, and to avoid high temperature and cold.
	Intra-system velocity Flow 2-5mL/h Intra-system velocity refers to the velocity under 6.00 VDC and 25°C, unless there are additional instructions
Product shelf-life	3 years

compatible Model:

All patient monitors

We have different IBP transducers for all brands.

All Models available in our compamy TEVEIK CE /ISO13485 Edward disposable invasive blood pressure IBP transducer

Operation specification requirements and considerations

1)Please check if the packing is complete and not broken.

2)Turn the monitor ON prior to setting up the disposable pressuretransducer system.
3)Open the disposable pressure transducer kit package using sterile technique. Verify that all
connections are secure and all stopcock handles are good. Be careful to not over-tighten luer connections.
4)All side ports of stopcocks in monitoring kits are protected by vented caps which are to remain in place until the system is filled with sterile solution and dedubbled. These vented caps should always be replaced with non-vented caps provided in a separate pouch in each kit.


*From:	Your email address is incorrect!
*To:	Shenzhen Teveik Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!